Tel:86-756-6162999
86-756 -6162566
Scanning code
Page copyright:2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building:China Enterprise Power Zhuhai
PRODUCT
Product Details
Fute F621 senior exterior wall paint
Product manual |
Use |
Fute F621 senior exterior wall paint is a high-quality exterior wall latex paint with excellent weather resistance, stain resistance, scrub resistance and mold and algae resistance. |
Fote F621 decorative matte acrylic latex paint can be used on different substrates: gypsum board, mortar, brick, concrete, mortar bottom and fiber cement. It has good wet-edge overlap performance, less splashing on roller coating, and good anti-fouling ability. |
Features, advantages |
Performance guide |
Excellent alkali, mildew and algae resistance.
Excellent weather resistance and color retention.
Excellent stain resistance, the paint film is resistant to scrubbing and easy to maintain. Excellent adhesion.
|
Weather resistance: Excellent resistance to cracking, flaking and chalking. Heat resistance: Heat resistance to 70 ° C (dry).
Solvent: it is sensitive to strong solvents and has a certain tolerance to yeasts and aliphatic hydrocarbons.
Acid resistance: Excellent.
Alkali resistance: Excellent.
Mildew resistance and algae resistance: Can prevent the growth of micro-plants in the atmosphere under good ventilation
|
Painting data:
luster |
Matte |
Painting method |
Roller coating, spraying or brushing |
colour |
Available in many colors |
Clean |
Soapy water |
Surface dry |
60 minutes @ 25 ° C and 50% relative humidity |
toxicity |
Lead-free, non-toxic dry film |
Repaint |
8 hours or more @ 25 ℃ and 50% relative humidity |
Expiration date |
24 months without opening and 25 ℃ |
Number of coatings |
2 layer |
dilution |
Not recommended or diluted up to 5% in water |
Theoretical coverage:
At a dry film thickness of 25 microns, the theoretical coverage is 8.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, application conditions, surface roughness and absorbency
Construction guidance safety and environmental protection |
All new concrete surfaces must be dry for more than 30 days, and the wall must have a moisture content of less than 14% and a pH of less than 10 before painting.
The substrate must be cured, clean, intact, and free of any contaminants such as oil, mold releases, mortar spatters, mold and algae. Irregularities and protrusions on the surface must be repaired to keep it flush with the surrounding surface. Metal objects on the surface, tying wires, etc. must be removed or rust-proofed. Then apply Fote F500 alkali-resistant primer.
All old surfaces: Remove the loose paint film and thoroughly remove defective surfaces such as mold, bulging, cracking and chalking, and repair the defects. The properly treated base surface is coated with Flut F501 super strong penetration sealing primer.
Ensure that the primer is completely cured and covers the substrate evenly after application. For best performance this product is not recommended for dilution.
Painting steps and tools:
Can be applied by roller coating, conventional spraying or airless spraying. Corners can be applied by brushing. Protective equipment:
Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.
Spills:
All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.
Health effects:
If it gets in your eyes, it can irritate the glasses and cause discomfort. Inhalation of the spray during spraying can cause irritation to the respiratory system.
Ensure adequate ventilation during coating and drying.
|
Construction Notes
Transportation and storage
Packing capacity |
25kg |
Store |
Store at 5 ° C-40 ° C. Frost, sun and rain are strictly prohibited. |
Cargo type |
Non-dangerous goods; no special transportation requirements. |