Tel:86-756-6162999
86-756 -6162566
Scanning code
Page copyright:2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building:China Enterprise Power Zhuhai
PRODUCT
Product Details
Fute F668 elastic exterior wall paint
Performance guide |
Performance guide |
Fute F668 is a specially formulated flexible exterior coating with high flexibility and excellent weather resistance. This product is based on the new high-tech UV curing technology, internal plasticizing and self-crosslinking technology, so that the paint film has excellent elasticity and excellent stain resistance and durability.
|
Fluter F668 is a long-term flexible acrylic topcoat, suitable for a variety of substrates, such as mortar, masonry, concrete and fiber cement. It has good wet edge retention to minimize rolling marks and has excellent stain resistance. 'There are very rich colors to choose from.
|
Features, advantages |
Performance guide |
Excellent elasticity, covering fine cracks in the wall.
Excellent hiding power and high coverage can meet economic requirements. Excellent alkali resistance, reducing the risk of fading.
Anti-mold and anti-algae, can resist the growth of algae and mold in humid environment. Excellent stain resistance, which can reduce the accumulation of dust and keep the building's external walls clean
|
Weather resistance: Excellent color retention, as part of the entire system, resistance to cracking, flaking and chalking.
Elasticity: can cover wall cracks (the thicker the coating film, the stronger the ability to cover cracks).
Heat resistance: The dry film can withstand high temperature of 70 ℃.
Salt spray resistance: Excellent.
Alkali resistance: Excellent.
Mildew resistance and algae resistance: Resistance to the growth of microorganisms in the air in well-ventilated areas.
|
Painting data:
luster |
Hiramitsu |
Painting method |
Roller coating, spraying or brushing |
colour |
Available in many colors |
Clean |
Soapy water |
Surface dry |
60 minutes @ 25 ° C and 50% relative humidity |
toxicity |
Lead-free, non-toxic dry film |
Repaint |
More than 24 hours @ 25 ℃ and 50% relative humidity |
Expiration date |
24 months without opening and 25 ℃ |
Number of coatings |
2-4 layers |
dilution |
Not recommended or diluted up to 5% in water |
Theoretical coverage:
At a dry film thickness of 40 microns, the theoretical coverage is 8.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, construction conditions, surface roughness, and absorbency.
Construction guidance |
Health, safety and environmental information |
All new concrete surfaces must be dry for more than 30 days, and the wall must have a moisture content of less than 14% and a pH of less than 10 before painting.
The substrate must be cured, clean, intact, and free of any contaminants such as oil, mold releases, mortar spatters, mold and algae. Irregularities and protrusions on the surface must be repaired to keep it flush with the surrounding surface. Metal objects on the surface, tying wires, etc. must be removed or rust-proofed. Then apply Fote F500 alkali-resistant primer.
All old surfaces: Remove the loose paint film and thoroughly remove defective surfaces such as mold, bulging, cracking and chalking, and repair the defects. The properly treated base surface is coated with Flut F501 super strong penetration sealing primer.
Ensure that the primer is completely cured and covers the substrate evenly after application. For best performance this product is not recommended for dilution.
Painting steps and tools:
Can be applied by roller coating, conventional spraying or airless spraying. Corners can be applied by brushing.
Note: Avoid the rain for at least 48 hours after the elastic coating is applied, and the drying time is longer when the temperature is low.
|
Protective equipment:
Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.
Spills:
All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.
Health effects:
If it splashes into your eyes, it can irritate your glasses and cause discomfort. If you inhale the spray during spraying, it will irritate the respiratory system and cause discomfort.
Ensure adequate ventilation during coating and drying.
|
Construction Notes
Transportation and storage
Packing capacity |
25kg |
Store |
Store at 5 ° C-40 ° C. Frost, sun and rain are strictly prohibited. |
Cargo type |
Non-dangerous goods; no special transportation requirements. |