Tel:86-756-6162999
86-756 -6162566
Scanning code
Page copyright:2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building:China Enterprise Power Zhuhai
PRODUCT
Product Details
Fute F650 water-based silicone acrylic exterior wall paint
Performance guide |
Performance guide |
Fute 650 is a high-grade water-based exterior wall coating formulated with 100% acrylic acid reinforced with silicon. It is designed for long-term protection of masonry substrates. The surface of the reactive silicone-acrylic coating will produce a very strong hydrophobic effect to promote the formation of water droplets (lotus effect), while allowing the substrate to escape (making the substrate breathable). This product can produce a matte finish after outdoor coating with a conventional medium-hair roller.
|
Fute F650 silicon-based coating is suitable for coating on masonry substrates with new construction and old paint films under various harsh climates. This product has excellent color consistency, less dust deposition, excellent water resistance and scrub resistance, and can resist pollution. |
Features, advantages |
Performance guide |
Silicone cross-linking is good for anti-staining.
Low water permeability prevents water intrusion.
Good water vapor permeability, allowing water vapor on the substrate to escape. Strong hiding power, excellent ability to cover the substrate.
|
Weather resistance: excellent weather resistance, chalking, color
Variation and extremely low dust deposition.
Anti-staining: a paint film with strong hydrophobicity, which is beneficial to the formation of water drops.
Algae / Fungal Resistance: Excellent.
Salt spray corrosion resistance: excellent.
Alkali resistance: Excellent.
|
Painting data:
luster |
exposure |
Painting method |
Rolling, brushing or spraying with medium hair roller |
colour |
Available in many colors |
Clean |
Soapy water |
Surface dry |
30 minutes @ 25 ℃ and 50% relative humidity |
toxicity |
Lead-free, non-toxic dry film |
Repaint |
4 hours or more @ 25 ℃ and 50% relative humidity |
Expiration date |
24 months without opening and 25 ℃ |
Number of coatings |
2 layer |
dilution |
Not recommended or diluted up to 5% in water |
Theoretical coverage:
At a dry film thickness of 25 microns, the theoretical coverage is 8.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, construction conditions, surface roughness, and absorbency.
Construction guidance |
Health, safety and environmental information |
All new concrete surfaces must be dried for more than 30 days, and the wall must have a moisture content of less than 14% and a pH of less than 10 before painting.
The substrate must be cured, clean, intact, and free of any contaminants such as oil, mold releases, mortar spatters, mold and algae. Irregularities and protrusions on the surface must be repaired to keep it flush with the surrounding surface. Metal objects on the surface, tying wires, etc. must be removed or rust-proofed. Then apply Fote F500 alkali-resistant primer.
All old surfaces: Remove the loose paint film and thoroughly remove defective surfaces such as mold, bulging, cracking and chalking, and repair the defects. The properly treated base surface is coated with Flut F501 super strong penetration sealing primer.
Ensure that the primer is completely cured and covers the substrate evenly after application. For best performance this product is not recommended for dilution.
Painting steps and tools:
Can be applied by roller coating, conventional spraying or airless spraying. Corners can be applied by brushing.
Note: Please consult the company's technical representative when applying bright-colored topcoat.
|
Protective equipment:
Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.
Spills:
All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.
Health effects:
If it splashes into your eyes, it can irritate your glasses and cause discomfort. Inhalation of the spray during spraying can cause irritation to the respiratory system.
Ensure adequate ventilation during coating and drying.
|
Construction Notes
Transportation and storage
Packing capacity |
25kg |
Store |
Store at 5 ° C-40 ° C. Frost, sun and rain are strictly prohibited. |
Cargo type |
Non-dangerous goods; no special transportation requirements. |