Tel：86-756-6162999

86-756 -6162566

Scanning code

Page copyright：2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building：China Enterprise Power Zhuhai

Company Profile
company culture

development path Qualification honor

Water-based paint

Anticorrosive coating

Architectural Coatings

Industrial coatings

Contact informationLeave message

PRODUCT

Product Details

Page view：

Name

Fute F960 self-cleaning king

Fute F960 is very suitable for general exterior wall latex paint, elastic exterior wall, textured paint exterior wall or real stone paint. It can significantly improve the anti-fouling ability of the external wall and the self-cleaning ability after dust adhesion After the dust is washed off). Not only can maintain the beautiful appearance of the building for a long time, but also extend the cleaning cycle of the building, thereby reducing the maintenance cost.

官网

A detailed description

product manual	use
Fute F960 is a water-based transparent overcoat varnish made from a special synthetic resin.	Fute F960 is very suitable for general exterior wall latex paint, elastic exterior wall, textured paint exterior wall or real stone paint. It can significantly improve the anti-fouling ability of the external wall and the self-cleaning ability after dust adhesion After the dust is washed off). Not only can maintain the beautiful appearance of the building for a long time, but also extend the cleaning cycle of the building, thereby reducing the maintenance cost.
Features, advantages	Performance guide
Excellent self-cleaning property, decomposes stains and dust on the surface of the paint film. Water-based, safe and environmentally friendly. Excellent stain resistance, can keep the building beautiful for a long time. Excellent mold and algae resistance.	Self-cleaning: It has excellent performance of decomposing pollutants under sunlight, and it can be automatically removed by rain flushing dust. Water resistance: Excellent resistance to rain erosion. Mildew and algae resistance: It can decompose the fungi attached to the surface, and has excellent mold and algae resistance.

Painting data：

luster	Soft light	Painting method	Rolling, spraying or brushing with a short-hair roller
colour	Not applicable	Clean	Soapy water
Surface dry	30 minutes @ 25 ℃ and 50% relative humidity	toxicity	Lead-free, non-toxic dry film
Repaint	Not recommended	Expiration date	12 months without opening and 25 ℃
Number of coatings	1 story	dilution	Not recommended or diluted up to 5% in water

Theoretical coverage：

The theoretical coverage rate is 120 square meters / kg, and the actual coverage rate will vary according to factors such as construction method, construction conditions, surface roughness, and absorbency.

Construction guidance

Health, safety and environmental information

It must be ensured that the topcoat is completely cured and free of any contaminants such as oil, mold release, mortar spatter, mold and algae.

All old surfaces: Remove the loose paint film and completely remove the defective surfaces such as mold, bulging, cracking and chalking, and repair, refurbish and repaint the top coat before using the product.

Before and after construction, avoid rainy weather or low-temperature and humid weather.

It is recommended to do it once.

For best performance this product is not recommended for dilution.

Painting steps and tools:

Can be applied by roller coating, conventional spraying or airless spraying. Corners can be applied by brushing.

Note: During the construction, pour the product into a clean and clean bucket, and then use the wet short-hair roller to apply.

When the topcoat color is bright or dark, please consult your technical representative for a matching guide.

Protective equipment:

Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.

Spills:

All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.

Health effects:

If it splashes into your eyes, it can irritate your glasses and cause discomfort. Inhalation of the spray during spraying can cause irritation to the respiratory system.

Ensure adequate ventilation during coating and drying.

Construction Notes

The coating of Flute F960 self-cleaning varnish is recommended to be carried out at a temperature of 10 ° C to 30 ° C. It should not be exposed to rain and frost for the first 24 hours after construction. Do not carry out construction in full sunlight, high temperature and strong wind.

If applied under 10 ℃ or high humidity, the drying time will be longer. Application on a wet substrate will dilute the product. Do not apply paint at this time. When working under high humidity environment, ensure sufficient drying time. Ensure sufficient drying time before raining to avoid rain damage to the coating。

Transportation and storage

Packing capacity	20kg
Store	Store at 5 ° C-40 ° C. Frost, sun and rain are strictly prohibited.
Cargo type	Non-dangerous goods; no special transportation requirements.