FT-FEVESeries fluorocarbon coating

FT-C series fluorocarbon coatings are normal or medium temperature curing fluorocarbon coatings based on fluoroolefin monovinyl ether (FEVE). Therefore, it has three advantages that other coatings do not have. Excellent corrosion resistance, super weather resistance (can be used outdoors for more than 20 years) and anti-fouling. Is currently known as the best new building materials.

官网

A detailed description

Product description

The FTC series of room temperature or medium temperature curing coatings are spray-coated, roller-coated, and brush-coated, with good decoration and rich colors. Can be used for repairing fluorocarbon curtain wall panels and profiles; it can also be directly coated on large locomotives, bridges, drilling platforms, water conservancy facilities, railings, aluminum alloy curtain walls, television towers, stadiums, building cement walls, and for restaurants , Bathroom, clean room, food factory, pharmaceutical factory, hospital and other decoration. It has the characteristics of energy saving and convenient construction. Its service life is 20 years, which is comparable to PVDF coatings.

FT-C series normal or medium temperature curing fluorocarbon coatings include putty, primer, topcoat, varnish, curing agent, thinner, etc. Depending on the surface color, gloss, all pigments and application requirements, a three-coat construction process using varnish or a second-coat construction process without varnish can be used.

Process parameters

project		index
		Ⅰ type	Ⅱ type
Fineness, pm (except coating components containing aluminum powder and pearlescent pigment)		Agree
Non-volatile matter,%≥	Solid color finish	45	50
	Metallic finish	40	45
	Varnish	38	40
Solvent soluble fluorine content , %≥		18	10
Drying time，h ≤		Surface dry 2h dry 24h	(140±2)℃0.5hOr agreed
luster(60°)(Excluding paints containing aluminum powder and pearlescent pigments)		Agree
Pencil hardness (scratch) ≥		—	2H
Impact resistance,cm ≥		—	40
Adhesion， level ≤		1
Bending resistancemm ≤		—	3

Chemical industry standards（Fote standardHG/T13792-2005		index
Project Department		Ⅰtype	Ⅱtype
State in container		Stir-free even after stirring
FinenessUM（Excluding coating components containing aluminum powder and pearlescent pigments）		Agree
Non-volatile matter，% ≥	White and light (Except coatings containing aluminum powder and pearlescent pigment)	—		50
	Other colors			40
Solvent soluble fluorine content，%≥	Two-component（Paint components）	18		—
	Single component	—		10
Drying time，h≤	Surface dry (self-drying paint)	2
	Dry (self-drying paint)	24
	Drying (baking paint) (140 soil 2) ℃	—		0.5Or agreed
Coverage ≥	White and light (Except coatings containing aluminum powder and pearlescent pigment)	0.90
	Other colors	Agree
Film appearance		normal
valid period（5h）(Except baking type)		by
Repaintability		Repaint accessibility
luster(60°)(Excluding paints containing aluminum powder and pearlescent pigments)		Agree
Pencil hardness（Abrasions） ≥		—			F
Impact resistance,cm ≥		—			40
Adhesion，level≤		1
Bending resistancemm		—			3
Acid resistance（168h）		nothing unusual
Mortar resistance（24h）		No change			—
Alkali resistance（168h）		—			nothing unusual
Water resistance（168h）		nothing unusual			—
Scrub resistance, times		No change
Pollution resistance		10000
Stain resistance (white and light colors.), (Except coatings containing aluminum powder and pearlescent pigments)% ≤: 10		by
Solvent wipe resistance, times (type is xylene, type is methyl ethyl ketone)		10			—
Humidity and heat resistance		100
Salt spray resistance		—			1000hNot frothy，Does not rust or fall off
		—			1000hDoes not bubble, does not rust, does not fall off
Artificial weathering resistance	White and light a Flour grade Discoloration level Light loss level	2500hNo blistering, no cracking 1 2 2			2500hNo blistering, no cracking 1 2 2
	Other coloring grades Discoloration level Light loss level	2500hDoes not bubble, does not fall off, does not crack Agree Agree Agree			2500hDoes not bubble, does not fall off, does not crack Agree Agree Agree
A light color refers to the light color of the coating film formed by using a white paint as the main component and a light-color paint formulated by adding an appropriate amount of color paste, according to GB / T15608-1995 4. 3.2 The brightness value is between 6-9 (YD55≥31.26 in the three stimulus values)