Tel:86-756-6162999
86-756 -6162566
Scanning code
Page copyright:2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building:China Enterprise Power Zhuhai
PRODUCT
Product Details
Water-based acrylic paint crystal
Product introduction
Product Application Features
Physical and chemical parameters
name |
Primer |
Plain topcoat |
Flash paint (aluminum powder, pearl) |
Fineness,um |
<25 |
<15 |
-- |
Solid,% |
50±2 |
50±2 |
35±2 |
Thinner |
Deionized water |
Deionized water |
Deionized water |
Reference dilution ratio |
100:20-30 |
100:10-20 |
100:10-20 |
Spray viscosity, (coated -4 # cup) |
20-40s/25℃ |
20-40s/25℃ |
20-40s/25℃ |
Coverage (theoretical value),m2/kg |
8-15
|
5-10 |
5-8 |
Recommended film thickness,um |
10±2 |
25±2 |
25±2 |
Curing temperature,℃ |
175±5 |
175±5 |
175±5 |
Curing time,min |
14±1 |
14±1 |
14±1 |
Performance parameter
project |
index |
project |
index |
Pencil hardness |
≥H |
Resistant to hydrochloric acid(15min) |
No change |
Impact resistance |
≥50kg.cm |
Butanone-resistant wipe |
≥150Times |
Dry adhesion |
0level |
Mortar resistant(24h) |
No change |
Wet adhesion |
0level |
Resistant to detergents(72h) |
No change |
Boiling water boiling adhesion |
≤1level |
Window wash solution(24h) |
No change |
Boiling water resistant |
≥1h,No change |
Humidity and heat resistance |
≥1500h |
Resistant to nitric acid(30min) |
ΔE≤5 |
Salt spray resistance |
≥1500h |
Abrasion resistance |
≥1.6L/μm |
Weatherability |
≥1000h,Allows slight chalking and discoloration |
Performance refer to American standard AAMA2603
Remark:
1、The above-mentioned process is aimed at the workpiece to be sprayed that has been processed, and the pre-treatment method of the workpiece can be made without special changes, which is the same as the original solvent-based coating.
2、During the construction process, to ensure a good construction environment, the production line should always be in a clean and dust-free state.
3、The water used for coating dilution is deionized water.
4、The low-temperature baking temperature should be appropriately adjusted according to the actual construction environment and equipment conditions of the spraying line. The recommended temperature setting range is 50-80 ° C.
5、After the paint film is cured at high temperature, the relevant performance test can be performed by leaving it at room temperature for 24 hours.
6、Before using this water-based product, make sure that the pipes of the spraying equipment are clean and free of impurities, oil, and other solvent residues that are incompatible with this product. Do not use strong solvents such as xylene, turpentine, and ethyl acetate to clean the pipes. Roads to avoid pollution and other irreversible effects.
7、Water-based coatings have extremely strong electrical conductivity during the construction process. Construction workers should ensure that electrostatic protection measures are taken to prevent electric shock.