- |
-
-
Tel：86-756-6162999
86-756 -6162566
Scanning code
Page copyright：2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building：China Enterprise Power Zhuhai
PRODUCT
Product Details
Water-based stainless steel paint
| product manual |
Surface treatment |
|
This 900X series product is made of water-based acrylic resin, amino resin, pigment, filler, film-forming aid, and deionized water through scientific compounding, and has excellent anti-corrosion and rust-proof performance. It can be diluted directly with tap water for safer construction.
|
All surfaces must be intact, dry and clean, free of grease, dirt, mold release, curing, weathering, welding slag, loose paint films and other foreign matter.
New surface: In order to make the performance of the paint better, the surface of the steel should be sandblasted to reach the standard of Sa2.5-3, and the surface roughness is equivalent to No.3 and BN10a of Rugotest standard. There should be no sand or dust on the surface. Paint immediately after sandblasting to prevent the surface from rusting or contaminating again.
Old paint surface: The old paint film must be completely removed, and then surface treated with reference to the new surface, at least sandblasted to SSPC-SP10 or SSI-Sa2.5.
|
|
use |
Painting data |
|
Used for anti-corrosion and anti-rust protection of stainless steel and steel components. |
Gloss: Highlight
Color: Available in multiple colors
Construction temperature range: 5 ℃ -40 ℃. In addition, the surface temperature of the steel should be higher than the dew point by 3 ℃ to prevent condensation.
Film thickness: wet film about 60-90 microns dry film about 30-50 microns
Number of coatings: 1 layer
Dilution: about 5% water dilution
Coating method: Rolling, brushing or spraying with medium hair roller
|
|
Product features, advantages |
|
|
With high gloss and fullness
Has excellent anti-corrosion and anti-rust performance
Can be diluted directly with tap water for safer construction;
|
Performance guide：
Construction guidance
All surfaces must be intact, dry and clean, free of grease, dirt, mold release agents, cured products, weathering materials, welding slag and other foreign materials.
Health, safety and environmental information
Theoretical coverage
At a dry film thickness of 25 microns, the theoretical coverage is 6.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, construction conditions, surface roughness, and absorbency.
Construction Notes
Transportation and storage