Tel：86-756-6162999

86-756 -6162566

Scanning code

Page copyright：2019 Zhuhai Flute Technology Co., Ltd. 粤ICP备19031179号 Website management Website building：China Enterprise Power Zhuhai

Company Profile
company culture

development path Qualification honor

Water-based paint

Anticorrosive coating

Architectural Coatings

Industrial coatings

Contact informationLeave message

PRODUCT

Product Details

Page view：

Name

Water-based elastic fluorocarbon paint

This 600X series product is made of 50% fluorine-containing water-based fluorocarbon resin, pigment, filler, and deionized water through scientific compounding and refining. Due to its high fluorine content and extremely low surface energy, it has excellent stain resistance and durability.

官网

A detailed description

product manual	Painting data
This 600X series product is made of 50% fluorine-containing water-based fluorocarbon resin, pigment, filler, and deionized water through scientific compounding and refining. Due to its high fluorine content and extremely low surface energy, it has excellent stain resistance and durability.	Gloss: low or semi-gloss Color: Available in multiple colors Construction temperature range: 5 ℃ -40 ℃. In addition, the surface temperature of the steel should be higher than the dew point by 3 ℃ to prevent condensation. Film thickness: about 60-90 microns for wet film, about 25-50 microns for dry film Repaint: more than 6 hours Number of coatings: 1-2 layers Dilution: about 5% water dilution Coating method: Rolling, brushing or spraying with medium hair roller
use
This product is a fluorocarbon topcoat with long-term flexibility. It can be used on the surface of a variety of substrates, such as mortar, masonry, concrete and fiber cement, through supporting primers. At the same time, it has anti-corrosion and anti-rust properties for steel components and guardrails Excellent protection. There are very rich colors to choose from.
Product features, advantages
Excellent elasticity, can cover wall cracks. Excellent hiding power. Excellent alkali resistance, reducing the risk of fading. Excellent stain resistance and durability, reducing dust buildup and keeping building exterior walls clean Has excellent anti-corrosion and anti-rust performance. It can be diluted directly with tap water for safer construction.

Performance guide：

Drying time:

Surface dry (23 ± 2 ℃) ≤5 hours

Hard drying (23 ± 2 ℃) ≤7 days

Adhesion (1mm interval): ≤ 1 level

Salt spray resistance: 1000 hours

Construction guidance

All new concrete surfaces must be allowed to dry for more than 30 days, and the wall must have a moisture content of less than 14% and a pH of less than 10 before painting.

The substrate must be cured, clean, intact, and free of any contaminants such as oil, mold releases, mortar spatters, mold and algae. Irregularities and protrusions on the surface must be repaired to keep it flush with the surrounding surface. Metal objects on the surface, tying wires, etc. must be removed or rust-proofed. Then apply a matching primer.

After the old surface: remove the loose paint film, and completely remove moldy, bulging, cracking and chalking defects, and repair the defects. The properly treated base surface is coated with Flut W178 super strong penetration sealing primer.

Ensure that the primer is completely cured and covers the substrate evenly after application. For best appearance and protection, the primer or middle coat must be intact and level.

Painting steps and tools：

Can be applied by roller, conventional spray or airless spray. Corners can be applied by brushing.

Note: Avoid the rain for at least 24 hours after the elastic coating is applied, and the drying time is longer when the temperature is low.

Health, safety and environmental information

Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.

All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.

Health effects: If splashed into eyes, it may cause eye discomfort. Inhalation of the spray during spraying can cause irritation to the respiratory system.

Ensure adequate ventilation during coating and drying.

Theoretical coverage

At a dry film thickness of 25 microns, the theoretical coverage is 6.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, construction conditions, surface roughness, and absorbency.

Construction Notes

If necessary, dilute according to the instructions. Avoid excessive dilution.

Do not sand the last finish.

Application on a wet substrate will dilute the product. Do not apply paint at this time. When working under high humidity environment, ensure sufficient drying time. Ensure sufficient drying time before raining to avoid rain damage to the coating. Do not apply when the substrate temperature is below 5 ° C or the relative humidity is greater than 85%.

Transportation and storage

Packaging capacity 25KG

Storage Store at 5 ℃ -40 ℃. Frost, sun and rain are strictly prohibited.

Cargo type Non-dangerous and dangerous goods; no special transportation requirements.