Water-based fluorine paint

The F900X series products are made of water-based acrylic resin, water-based fluororesin, pigments, fillers, film-forming auxiliaries, and deionized water through scientific compounding. They have extremely low surface energy and excellent corrosion resistance. It can be diluted directly with tap water for safer construction.

官网

A detailed description

product manual	Painting data
The F900X series products are made of water-based acrylic resin, water-based fluororesin, pigments, fillers, film-forming auxiliaries, and deionized water through scientific compounding. They have extremely low surface energy and excellent corrosion resistance. It can be diluted directly with tap water for safer construction.	Gloss: Semi-Gloss or Highlight Color: Available in multiple colors Application temperature range: 5 ℃ -40 ℃. In addition, the surface temperature of the object to be coated must be higher than the dew point by 3 ℃ to prevent condensation. Film thickness: about 30-60 microns for wet film, about 10-30 microns for dry film Number of coatings: 1 layer Dilution: about 5% water dilution Coating method: Rolling, brushing or spraying with medium hair roller
use
Used for printer rollers, steel components and other coatings that require extremely low surface energy on the surface to be coated.
Product features, advantages
Very low surface energy Has excellent corrosion resistance Can be diluted directly with tap water for safer construction;

Performance guide：

Drying conditions: 200 ℃ × 12min

Adhesion (1mm interval): ≤ 1 level

Hardness: H

Salt spray resistance: 500 hours

Construction guidance

All surfaces must be intact, dry and clean, free of grease, dirt, mold release, curing, weathering, welding slag and other foreign matter。

Health, safety and environmental information

Personal protective equipment: Wear protective goggles and wear a suitable filter spray protective mask when sanding and spraying with sandpaper.

All spills should be covered with soil or sand. Do not pour paint from the tank into drains or drains. Dispose of used paint in accordance with local environmental regulations.

Health effects: If splashed into eyes, it may cause eye discomfort. Inhalation of the spray during spraying can cause irritation to the respiratory system.

Ensure adequate ventilation during coating and drying.

Theoretical coverage

At a dry film thickness of 15 microns, the theoretical coverage is 8.0 m2 / kg. The actual coating rate will vary depending on factors such as construction method, construction conditions, surface roughness, and absorbency.

Construction Notes

If necessary, dilute according to the instructions. Avoid excessive dilution.

Do not sand the last finish.

Do not apply when the substrate temperature is below 5 ° C or the relative humidity is greater than 85%.

Transportation and storage

Packaging capacity 25KG

Storage Store at 5 ℃ -40 ℃. Frost, sun and rain are strictly prohibited.

Cargo type Non-dangerous and dangerous goods; no special transportation requirements.